The Cork Medical Products Wound Dressing Accessories are designed to be used in conjunction with a Negative Pressure Wound Therapy (NPWT) pump to provide NPWT to aid and promote wound healing by removing excess exudates, infectious material, and tissue debris.
Y-Connector - Part Number CWY-100
The Cork Medical Y-Connector is designed to simultaneously treat multiple wounds on the same patient. The multiple wounds should be the same etiology requiring the same pressure settings.
The Cork Medical Y-Connector is indicated for:
* Compatible With all Nisus NPWT wound dressings.
24" Extension Tubing - Part Number CSP-100-ES-EXT
Cork Medical 24" Extension Tubing is used to add length to port pad tubing and will aid in increasing mobility for patients with a wound located on distal portions of the body.
Cork Medical 24" Extension Tubing is indicated for:
* Single wounds where the patient needs longer tubing to increase mobility.
Bridge Foam - Part Number: NIS-BRDG-A-16
Cork Medical Bridge Foam bridges posterior wounds to the lateral or anterior surface, minimizing drainage/port pad tubing-related pressure to surrounding tissue.
The 21.75" (L) x 1.96" (W) Cork Medical Bridge Foam is Indicated for:
* Bridging the port pad away from any wound where pressure might be applied to the port pad.
Optifoam Foam - Part Number: FOAM-WHITE-A-16
The Cork Medical HydroLite White Foam Wound Dressing is a sterile, absorbent, polyurethane foam wound dressing. HydroLite White Foam absorbs wound drainage, promotes a moist environment helpful to healing, and serves as a barrier against water and bacteria when used as a secondary dressing.
The 3.75" (L) x 3.75" (W) HydroLite White Foam Wound Dressing is indicated for:
* Minor abrasions, minor lacerations, and minor scalds and burns.
* Derma ulcers (e.g., pressure ulcers, leg ulcers, and other secreting lesions)
* More severe lacerations, cuts, and abrasions
* Second degree burns
* Donor sites
* Other superficial wounds
The PDF is available to download below